Window films
Safety
Transparent burglary protection film / Safe 4 XC
Safer 4 XC solvent resistant films provide highly effective protection against tags and graffiti. The film's protective qualities are not limited to solvents, it will also shield a window's surface from other acts of vandalism involving scratching or acid etching. An easy film to install and replace, it is also classed as a security film, providing protection by holding shattered glass in place in the event of an explosion or serious impact.
1. ''Hard'' scratch resistant layer, for durability and ease of maintenance during window cleaning
2. High optical quality polyester
3. Bonding adhesive
4. High optical quality polyester
5. Reinforced PS Adhesive to accompany the elasticity of the film in case of impact, glass polymerization within 30 days
6. Protection release liner, disposable after installation
Safety film with reinforced PS adhesive requiring a suitable application solution (Film On ref 600-F0355 and 2cl/litre of water) and a suitable safety squeegee 150-054/150-055/150-056. Do not clean for at least 1 month and do not apply stickers or other adhesives to the film.
Data calculated based on film applied to clear glass 3 mm thick (*on double glazing 4-16-4)
| Ultraviolet transmission | 5 % |
| Visible light transmission | 85 % |
| Reflection of external visible light | 11 % |
| Reflection of internal visible light | 11 % |
| Total solar energy rejected | 19 % |
| Total solar energy rejected 2* | 19 % |
| Solar ratio : | |
| Solar energy reflection | 9 % |
| Solar energy absorption | 14 % |
| Solar energy transmission | 77 % |
| Reduction in Solar Glare | 14 % |
| g-value | 0.83 |
| u-value | 5.7 |
| Heat loss Reduction (Winter) | |
| Rejected Infrared (760-2500 nm) | |
| Shading coefficient | 0.9 |
| Tensile strength (kg/cm²) | 28 |
| Elongation at break | 125% |
| Installation type : Exterior | |
| Roll length | 30,5 m |
| Film composition | PET |
| Thickness | 120 μ |
| Colour from the outside : TRANSPARENT | |
Vertical installation and on standard glass surface*
| Clear single pane |  |
| Tinted single pane | |
| Reflective tinted single pane | |
| Clear double pane | |
| Tinted double pane | |
| Reflective tinted double pane | |
| Gas-filled double pane - Low E | |
| STADIP EXT. clear double pane | |
| STADIP INT. clear double pane | |
 Yes
 Caution
 Not recommended
|
|
*Recommendations provided on the basis of a glazed surface covering up to 2.5m².
Non-contractual data. We reserve the right to modify the composition of our films at any time. Consult our warranty documents.